🔋 HI25KW & HI30KW Hybrid Energy Storage Inverter
High Reliable Hybrid PCS for Small & Medium Microgrid | PV Compatible, Grid/Off-Grid Dual Mode
🏘 Typical Application Scenarios
Small & Medium C&I
Peak shaving & backup power
Island Off-grid Microgrid
Remote island multi-energy supply
Luxury Villa ESS
Residential backup & self-consumption
Agricultural Farm
Irrigation & livestock power supply
Second-life Battery ESS
Cost-effective retired EV battery storage
⚡ Core Features & Product Advantages
✅ High Efficiency & Superior Reliability
- Low power consumption: Standby ≤15W, No-load loss ＜100W
- Max conversion efficiency up to 97.8%
- Isolated air duct design improves equipment safety & environmental reliability
- 150% transient overload capability for harsh fluctuating loads
- Seamless grid/off-grid switch to guarantee uninterrupted power supply
- IP6X control compartment protection, dust-proof & salt-fog resistant for severe ambient
⚙ Intelligent Working Functions
- Diesel genset hybrid operation mode to optimize multi-energy utilization efficiency
- Independent three-phase grid control to optimize uneven power distribution
- Ultra-fast seamless switch: less than 5ms between grid-connected & off-grid mode
- Full grid compatibility: HV/LV ride-through, anti-islanding & black start capability
- Max 15 units parallel on AC side, DC side also supports multi-machine parallel connection
- Built-in EMS energy management system to realize auto peak-shaving & self-consumption modes
🔧 Convenient Installation & Maintenance
- Multi-protocol communication, compatible with mainstream BMS for remote cloud EMS monitoring
- Front wiring & front-maintenance cabinet structure to cut field construction cost
- Complete hardware fault protection & historical fault record storage function
- Ultra-wide battery input down to 200V, perfect for low-cost second-life lithium batteries:30kW/20-70kWh(100AH),30kW/(60-215)kWh(280AH)
📊 Full Technical Specifications
▌ DC Side (Battery Input)
| Specification Item | HI30KW | HI25KW |
|---|---|---|
| Max. Battery Voltage | 850V | 850V |
| Min. Battery Voltage | 200V | 200V |
| Rated Battery Voltage Range | 320V~850V | 320V~850V |
| Max. DC Input Current | 100A | 80A |
▌ PV Input Parameters
| Max PV Open-circuit Voltage | 850V |
| Min PV Startup Voltage | 200V |
| MPPT Operating Voltage Range | 300V~830V |
| Max PV Input Current | HI30KW:32A+32A | HI25KW:25A+25A |
▌ AC Off-Grid Parameters
| Rated Output Voltage | 400V/230V |
| Output Voltage THD | ＜1.5% (Resistive Load) |
| 3 Phase Unbalance Capacity | 100% |
| Output Frequency Range | 50/60Hz |
| Output Overload Spec | 1.25×In for10s;1.5×In for100ms |
▌ AC Grid-Tie Parameters
| Item | HI30KW | HI25KW |
|---|---|---|
| Rated Grid Output Power | 33KVA | 27.5KVA |
| Max AC Output Current | 50A | 40A |
| Rated AC Voltage | 400V/230V | 400V/230V |
| Grid Voltage Tolerance | -20%~+15% | -20%~+15% |
| Grid Frequency Range | 50Hz:47~52Hz /60Hz:57~62Hz | 50Hz:47~52Hz /60Hz:57~62Hz |
| Grid Current THD(>30% Load) | <3% | <3% |
| Power Factor Range | -100%~+100% | -100%~+100% |
▌ Global System Parameters
| Communication Port | HMI(Cloud Platform):CAN/RS485 | Battery:CAN/RS485 |
| DI/DO Terminal | DI:2CH, DO:2CH |
| Max. Conversion Efficiency | 97.8% |
| Mounting Type | Rack Insert Frame Installation |
| Power Loss | Standby＜10W, No-load＜100W |
| Net Weight | 35kg |
| Protection Grade | IP6X (Sealed Control Compartment) |
| Ambient Temp Range | -25℃ ~ +60℃ |
| Humidity | 0~99%RH (Non-condensing) |
| Cooling Mode | Intelligent Forced Air Cooling |
| Altitude Derating | 2000m full power;3000m:90% rated;4000m:80% rated |
| Certification & Grid Function | CE Approved, Support LVRT/HVRT/SVG |
🗺 Electrical Topology & Working Modes
System Topology Introduction
Dual independent MPPT PV input + wide-range lithium battery access connect shared DC bus via bidirectional DCDC converter. Rear-end adopts three-phase full-bridge inverter topology, AC terminal integrates grid breaker, off-grid load output & diesel genset access terminal. Built-in EMS core controller to realize automatic coordination among PV, battery, mains & diesel generator.
Three Standard Operation Modes
- Grid-tie Self-consumption:PV prioritizes local load consumption, surplus power feed into grid, battery charge during off-peak tariff for peak cut;
- Off-grid Island Mode:Auto switch off-grid within＜5ms once utility blackout, PV+battery supply critical loads continuously;
- Diesel Hybrid Mode:Genset auto-start when PV & battery insufficient to cover load for long-time off-grid power supply.
🛡 Complete Protection & Safety Mechanism
Over/Under Voltage Protection
Hardware lockout for over/under voltage on PV, battery and AC ports
Overcurrent & Short-circuit Protection
Instant power cut-off for short-circuit to avoid internal component damage
Over-temperature Protection
Auto power derate first then full shutdown at over-limit temperature
Anti-islanding & Grid Fault Protection
Fast grid disconnection to meet international grid code requirement
BMS Interlock Protection
Sync battery abnormal signal from BMS to limit inverter output power
Reverse Power Anti-backfeed
Configurable zero export function for off-grid exclusive projects
❓ Frequently Asked Questions
Q1: What is minimum supported battery voltage? Can it use second-life EV batteries?
A: Min. battery input 200V, fully compatible with retired EV second-life lithium cells. Standard matching:30kW/20~70kWh(100AH) & 30kW/60~215kWh(280AH).
Q2: How many inverters can run parallel together?
A: Max 15 units parallel connection on AC side for capacity expansion; DC bus also supports multi-unit parallel access.
Q3: How fast for grid to off-grid seamless transfer?
A: Switch time＜5ms, zero power interruption for sensitive loads like server & medical equipment.
Q4: Can the machine operate under high altitude environment?
A: Full power within 2000m, derate to90% above3000m &80% above4000m, suitable for plateau & highland microgrid projects.
Q5: Does it support diesel generator hybrid working?
A: Yes, standard genset access port. Auto start diesel engine automatically when PV & battery power insufficient for continuous off-grid supply.
📦 Related Imax Power Storage Products
50/60KFCM3 Hybrid PCS
50KVA/60KVA medium power hybrid inverter for large C&I microgrid
100K/125K Container PCS
High-power cabinet PCS for utility-scale container energy storage
48V Low-Voltage Home ESS
Wall-mounted residential all-in-one storage for global household market
Cloud EMS Management Platform
Centralized cloud monitoring system for multi-machine microgrid cluster control
🤝 Global Business & After-sales Support
☎ Contact Information
Sales Manager(Dakun): +86-19066355917
WhatsApp & WeChat same number
Business Email: lee@imaxpwr.com
Company: Imax Power Technology Co., Ltd.
🛠 Warranty & Technical Service
• Standard 5-year global factory warranty
• Worldwide remote & on-site technical support
• Custom hardware & software solution development
🔗 Official Website Links
Product Center: Energy Storage & Microgrid Products
Project Cases: Global Site Reference Cases
Solution Center: Custom Microgrid Solutions
Inquiry Page: Contact Us Online